14k White or Yellow Gold Endless Hoop Earrings (10-20×1.0mm)

14k White or Yellow Gold Endless Hoop Earrings (10-20×1.0mm)

• Made in USA
• Tiny Hoops Size 10.0mm = 3/8?of an inch outer size and 8.0mm = 5/16? of inch inner size. The thickness of the hoop is 1.0mm = 1/32″ of an inch. The hoops are 14k gold have a pure gold body with a hollow interior and 14k solid gold piercing post. Every hoop comes with an authenticated 14k stamp.
• To select the proper size of hoops, take a millimeter ruler and measure the space between your piercing hole and the end of the earlobe. Once you get the size in millimeters add 2.0mm and that will give you approximately the size of the hoops to purchase for a snug fit. If you like regular fit with space, then keep adding millimeters until you get desired size. However, measurement is not always 100% accurate, we suggest you buy 3 or more different sizes to try them on.
• It is recommended that someone else assist you in putting on the endless hoop earrings. The easiest way to apply hoops is to hook the post to your ears from back-to-front, that way you can easily see where the solid post goes into the hoop.
• DO: Twist North to South to open, which keeps them in line with each other and makes it easier to get a tight closure. DO NOT: Pull sideway East to West. This not only makes the ring harder to open and close, but it also stresses the metal in the wrong direction and could weaken, bend, or damage the hoops
• All images enlarged to show the detail of the endless hoop earrings. Please refer to the image with the chart for size references.